3One
01-05-2010, 03:58 PM
MF-CHEETAH CE (CRIMSON EDITION) and MF-CHEETAH LITE
http://i190.photobucket.com/albums/z141/malloski/MF-Cheetah%20CE/cheetah_package.jpg
http://i190.photobucket.com/albums/z141/malloski/MF-Cheetah%20CE/P90.jpg
http://i190.photobucket.com/albums/z141/malloski/MF-Cheetah%20CE/desk01.jpg
CRIMSON EDITION ENHANCEMENTS
MF-CHEETAH Crimson Edition (CE)
* 430AMP amp level and 500AMP peak
* 7.4, 11.1v and 14.8v operating voltage (up to 18v max) - software auto detects voltage
* Factory-made custom 2-stage PCB has thicker conductors (Gold Plated) - Designed by 3One
* Optimized MF-Cheetah program (2nd gen)
MF-CHEETAH Lite Edition
* 340AMP amp level and 400AMP peak
* 7.4, 11.1v and 14.8v operating voltage (up to 18v max) - software auto detects voltage
* Factory-made custom 2-stage PCB has thicker conductors (Gold Plated) - Designed by 3One
* costs less than MF-Cheetah CE but still has the Optimized MF-Cheetah program (2nd gen)
Side by Side with a Peso coin
http://i190.photobucket.com/albums/z141/malloski/MF-Cheetah%20CE/peso.jpg
http://i190.photobucket.com/albums/z141/malloski/MF-Cheetah%20CE/m4.jpg
FEATURES: (UPDATED)
• 100% computer controlled electronics, with a dedicated CPU
• Fully assembled and Tested (not a DIY)
• Built-in Heatsink
• Fully protected against voltage spikes from the motor
• Fully protected against static discharge
• Advanced brake timing circuit.
• The circuit draws no current when not triggered.
• The trigger needs considerable current to turn on preventing false firing from condensation, grease, etc.
• Uses surface mounted parts to minimize size.
• Very tolerant to bad wiring, bad layout, noise, etc.
• Failure of the active braking MOSFET can’t turn the gun uncontrollably on
• New low heating trip circuit prevents damage under very long term short circuit conditions.
• Increases ROF (depends on the AEGs setup)
• Active Braking feature ensures that your spring is in rest position
• Active Braking can be turned on/off
• Adjustable burst-fire - Burst-Fire Mode feature added to your AEG without any modifications to the gun itself
• Rate-of-fire (ROF) adjustment by changing motor speed
• Motor soft-start for better performance and reduced wear
• Self diagnostics at power-up and during operation.
• Automatic battery voltage detection and monitoring
• Overvoltage, Undervoltage, and Overtemperature protection
• No more arcing! No more trigger contact wear! high currents no longer flow directly through these switch surfaces. No more corrosion!
• The unit warns you via motor Vibration (just like a celphone’s “vibe”) to notify you of low battery, sudden temperature change, etc.
• Li-Po compatible – 7.4v, 11.1v and 14.8v Lithium-Polymer battery packs runs smoothly
• Plug-and-play compatible with the optional Li-Po overdischarge protection boards from Project WolfDragon.
• Burst completion (whether burst completes if trigger is released early) can be turned on or off
• Built-in screw terminals make for easy installs. You can even rewire all of your AEGs so that it’s possible to “DOCK” the cheetah.
• Fully automatic shot timing detection means accurate bursts. No need to manually configure burst timing like with other mosfet burst-shot units!
• Fully automatic sensing of all timings for simple operation means it “just works”
• All options are fully configurable (motor speed, active braking, burst settings, etc) for those who want to tinker or customize. Either let it “just work”, or fiddle all you want!
• Easy Factory Reset means you can fiddle all you like and never worry about “breaking” the settings – just reset it and it’s back to the way it was the day you installed it!
• Can deliver over 7000 Watts of power! (I’m not sure if we’ll use this much power though)
• Can handle 500A peak and 65A sustained operation
• Dimensions: 50.8mm x 16.5mm x 13.5mm (a little bigger than an AA battery)
• Will fit into a tube that is at least 19mm in diameter.
• Weight: 14 grams
• Operational voltage range: 7.0V to 16.0V (18v Max)
• Auxillary connector for those of you who want to program your own add-ons, or interface to external sensors.
• The design is fully open source to allow Third Party support
CHEETAH VIDEO
http://www.youtube.com/watch?v=jrsJ1ZY4iBw
http://i190.photobucket.com/albums/z141/malloski/MF-Cheetah%20CE/cheetah_package.jpg
http://i190.photobucket.com/albums/z141/malloski/MF-Cheetah%20CE/P90.jpg
http://i190.photobucket.com/albums/z141/malloski/MF-Cheetah%20CE/desk01.jpg
CRIMSON EDITION ENHANCEMENTS
MF-CHEETAH Crimson Edition (CE)
* 430AMP amp level and 500AMP peak
* 7.4, 11.1v and 14.8v operating voltage (up to 18v max) - software auto detects voltage
* Factory-made custom 2-stage PCB has thicker conductors (Gold Plated) - Designed by 3One
* Optimized MF-Cheetah program (2nd gen)
MF-CHEETAH Lite Edition
* 340AMP amp level and 400AMP peak
* 7.4, 11.1v and 14.8v operating voltage (up to 18v max) - software auto detects voltage
* Factory-made custom 2-stage PCB has thicker conductors (Gold Plated) - Designed by 3One
* costs less than MF-Cheetah CE but still has the Optimized MF-Cheetah program (2nd gen)
Side by Side with a Peso coin
http://i190.photobucket.com/albums/z141/malloski/MF-Cheetah%20CE/peso.jpg
http://i190.photobucket.com/albums/z141/malloski/MF-Cheetah%20CE/m4.jpg
FEATURES: (UPDATED)
• 100% computer controlled electronics, with a dedicated CPU
• Fully assembled and Tested (not a DIY)
• Built-in Heatsink
• Fully protected against voltage spikes from the motor
• Fully protected against static discharge
• Advanced brake timing circuit.
• The circuit draws no current when not triggered.
• The trigger needs considerable current to turn on preventing false firing from condensation, grease, etc.
• Uses surface mounted parts to minimize size.
• Very tolerant to bad wiring, bad layout, noise, etc.
• Failure of the active braking MOSFET can’t turn the gun uncontrollably on
• New low heating trip circuit prevents damage under very long term short circuit conditions.
• Increases ROF (depends on the AEGs setup)
• Active Braking feature ensures that your spring is in rest position
• Active Braking can be turned on/off
• Adjustable burst-fire - Burst-Fire Mode feature added to your AEG without any modifications to the gun itself
• Rate-of-fire (ROF) adjustment by changing motor speed
• Motor soft-start for better performance and reduced wear
• Self diagnostics at power-up and during operation.
• Automatic battery voltage detection and monitoring
• Overvoltage, Undervoltage, and Overtemperature protection
• No more arcing! No more trigger contact wear! high currents no longer flow directly through these switch surfaces. No more corrosion!
• The unit warns you via motor Vibration (just like a celphone’s “vibe”) to notify you of low battery, sudden temperature change, etc.
• Li-Po compatible – 7.4v, 11.1v and 14.8v Lithium-Polymer battery packs runs smoothly
• Plug-and-play compatible with the optional Li-Po overdischarge protection boards from Project WolfDragon.
• Burst completion (whether burst completes if trigger is released early) can be turned on or off
• Built-in screw terminals make for easy installs. You can even rewire all of your AEGs so that it’s possible to “DOCK” the cheetah.
• Fully automatic shot timing detection means accurate bursts. No need to manually configure burst timing like with other mosfet burst-shot units!
• Fully automatic sensing of all timings for simple operation means it “just works”
• All options are fully configurable (motor speed, active braking, burst settings, etc) for those who want to tinker or customize. Either let it “just work”, or fiddle all you want!
• Easy Factory Reset means you can fiddle all you like and never worry about “breaking” the settings – just reset it and it’s back to the way it was the day you installed it!
• Can deliver over 7000 Watts of power! (I’m not sure if we’ll use this much power though)
• Can handle 500A peak and 65A sustained operation
• Dimensions: 50.8mm x 16.5mm x 13.5mm (a little bigger than an AA battery)
• Will fit into a tube that is at least 19mm in diameter.
• Weight: 14 grams
• Operational voltage range: 7.0V to 16.0V (18v Max)
• Auxillary connector for those of you who want to program your own add-ons, or interface to external sensors.
• The design is fully open source to allow Third Party support
CHEETAH VIDEO
http://www.youtube.com/watch?v=jrsJ1ZY4iBw