Cheetah Mosfet

[freemanx]

need help on cheetah mosfet, as I insert the battery the mosfets only performs one vibration or thus the whole dont work at all,

TIA

[krobinson103]

The tech connected it the wrong way in Yongsan. I'm guessing that the chip got fried when he did that. You may have to move back to the old direct wiring or (easier) replace the mosfet. I went there today and he sold me the wrong sized gears despite being told exactly what I wanted them for. Maybe you could go to Yongsan again and ask him to fix the problem he created? Otherwise just find another mosfet. We found one without the computer function for $20. Won't do burst, but it will make the gun lipol safe.

[freemanx]

Thanks, the problem is solved, the wire in the motor have been disconnected,

[freemanx]

my friend bought a utg ris the problem is the delta ring was out of stock..do you where to buy one?

[ackme]

if it vibrates it's probably fine, that means that it booted properly. try ebay for the delta ring, or redwolf, or ehobbyasia. By careful with the mosfet wiring, there's a lot of juice with the lipols.

[freemanx]

tnx chris..

[3One]

need help on cheetah mosfet, as I insert the battery the mosfets only performs one vibration or thus the whole dont work at all,

TIA

Hi Sir,

I've just want to ask what brand of Cheetah are you using? Is it the one from Terry? (Extreme-Fire)

[freemanx]

Hi Sir,

I've just want to ask what brand of Cheetah are you using? Is it the one from Terry? (Extreme-Fire)


Yes sir, It's an Extreme-Fire

[3One]

Yes sir, It's an Extreme-Fire

Great ... Terry's a good friend of mine... We help each other in the design and stuff so we basically have identical mosfets... We just have subtle differences in terms of software features...